Mobile Clamp Cart – Get Your Clamps Off the Wall

Article 71: Mobile Clamp Cart – Get Your Clamps Off the Wall

By: A Woodworker Who Needed One Place for 50 Clamps

Clamps are essential, but storing them neatly can be frustrating. This rolling cart keeps them all within arm’s reach, categorized, and stable.

Materials

• 3/4" plywood – (1) full 4×8 sheet

• Caster wheels (4) – locking preferred

• 1" dowels or 2×2 rails

• Wood screws

• Handle (optional)

Cut List

• Base: 24" x 36"

• Vertical panels (2): 24" x 36"

• Shelves/rails: (as needed for layout)

Tools Needed

• Circular saw or table saw

• Drill/driver

• Jigsaw (for curves, optional)

• Square

• Clamps!

Steps

1. Assemble Base

   • Attach casters and vertical panels. Ensure 90° upright position.

2. Add Clamp Supports

   • Stagger rails or dowels on both sides for parallel and F-style clamps.

3. Add Shelving or Hooks

   • Store small clamps or spring clamps in cubbies or bins.

4. Test Roll and Balance

   • Load clamps. Make sure cart is stable and rolls freely.

Sketch – Side View

  _________
 |_________| ← Top Shelf
 | || || ||| ← Clamps hang on dowels/rails
 |_________|
 |  Casters |