Build a Wall-Mounted Folding Workbench

Article 145: Build a Wall-Mounted Folding Workbench

By: A Woodworker Who Values Floor Space

This project is ideal for small shops, garages, or apartments where space is limited. The bench folds up against the wall when not in use.

Materials List

• ¾" Plywood (4'×8') – 1 sheet

• 2×4 studs – 4 pieces, 8' long

• Piano hinge – 36"

• Heavy-duty folding shelf brackets – 2

• Lag screws and anchors

• Wood glue and screws

Cut List

• Workbench top: 24" × 48" (¾" plywood)

• Wall cleat: 48" long (2×4)

• Folding leg frame: two 24" verticals and one 44" horizontal (2×4s)

Tools Needed

• Drill and bits

• Circular saw

• Stud finder

• Measuring tape

• Level

Assembly Instructions

1. Install Wall Cleat

   • Attach cleat to wall studs at 30–34" height with lag screws.

2. Attach Bench Top

   • Screw piano hinge to rear of bench top and to wall cleat.

3. Add Folding Brackets

   • Mount one under each side of the bench to support it when raised.

4. Optional: Add Legs

   • Build a folding leg frame for added strength.

Visual Sketch

Side View (Folded Down):
 ___________________________
|                           |
|  Bench Top (24"x48")      |
|___________________________|
        |           |
    Bracket      Bracket