Building a Wooden Birdhouse

Article 21: Building a Wooden Birdhouse

By: A Woodworker Who Loves the Outdoors

A birdhouse is a satisfying project with immediate rewards—watching new tenants move in!

Materials

MaterialQuantity1x6 pine board1 board, 6 ft longWood screws (1”)12 screwsWood glueAs neededExterior paint/stainOptional

Tools Needed

• Saw (handsaw or circular saw)

• Drill and bits (1.25” spade bit)

• Sandpaper

• Ruler and pencil

Measurements

PartSize (inches)Front/Back6 x 8Sides (x2)5 x 6Floor4 x 4Roof (x2)6 x 7

Steps

1. Cut All Pieces
   Cut the front, back, sides, floor, and roof panels.

2. Drill Entrance Hole
   Use the spade bit to drill a 1.25” hole in the front, 6” from the bottom.

3. Assemble the Body
   Attach sides to the back, then attach front. Glue and screw together.

4. Attach Floor and Roof
   Secure the floor from the sides. Screw on angled roof panels.

5. Paint or Stain
   Apply exterior-safe finish. Mount outside at least 6 ft above ground.

Visual: Birdhouse Diagram

[Front View]
    ____
   /    \\
  /      \\
 |   ()   |
 |        |
 |________|