Building a Wooden Birdhouse

Article 21: Building a Wooden Birdhouse

By: A Woodworker Who Loves the Outdoors

A birdhouse is a satisfying project with immediate rewards—watching new tenants move in!

Materials

• 1x6 pine board – 1 board, 6 ft long

• Wood screws (1”) – 12 screws

• Wood glue – As needed

• Exterior paint/stain – Optional

Tools Needed

• Saw (handsaw or circular saw)

• Drill and bits (1.25” spade bit)

• Sandpaper

• Ruler and pencil

Measurements

PartSize (inches)Front/Back6 x 8Sides (x2)5 x 6Floor4 x 4Roof (x2)6 x 7

Steps

1. Cut All Pieces
   Cut the front, back, sides, floor, and roof.

2. Drill Entrance Hole
   Use a 1.25” bit to drill a hole in the front, 6” from the bottom.

3. Assemble the Body
   Glue and screw sides, front, and back together.

4. Attach Floor and Roof
   Secure the base and angled roof panels.

5. Paint or Stain
   Use an exterior-safe finish and mount the birdhouse at least 6 ft off the ground.

Visual

[Front View]
    ____
   /    \\
  /      \\
 |   ()   |
 |        |
 |________|